The tool change point should be in the tool change workpiece, fixture, tool, machine tool without any collision and interference between the position, the tool change point of the machining center is often fixed.
The so-called knife is to determine the origin in the XH2412 gantry machining center coordinate system position, and the knife as the name implies is to replace the new tool, these two are in the machine tool production process is more important process, we need to pay special attention to in the operation.
Tool change point: XH2412 Longmen processing center has a tool library and automatic tool change device, according to the needs of the program can automatically change the tool. The tool change point should be in the tool change workpiece, fixture, tool, machine tool without any collision and interference between the position, the tool change point of the machining center is often fixed.
Knife setting method:
Horizontal knife alignment (X, Y coordinates) :
(1) lever dial indicator knife: knife point for cylindrical hole center.
(2) Use edge finder to set knife: round hole or reference edge.
(3) Use touch knife or trial cutting method of knife.
Z-direction tool alignment (Z coordinates) :
(1) Knife on the machine: use z direction setting device to knife.
(2) machine tool pre-adjustment + machine tool.
(3) Tool measuring instrument outside the machine: measuring tool diameter, length, blade shape and knife Angle.
Lunan Seiko on longmen processing center on the knife and knife change method and work points are the above several, a better grasp of the work points help us to better use the equipment, improve its work efficiency and bring good benefits.
English
